Segment An Edge For Multiple Splashes

Sometimes a counter has different height Splashes along the same length of the piece, like a full-height splash behind a sink or cooktop. Segment the Edge in order to apply different Splashes to the same length of the counter piece.

1. Go to Step 2 and click on the counter Edge you would like to modify.
2. Add a Bump-In with the Depth as small as possible, ".1" inch. The program will round up, so you won't lose any square footage in your Quote.
3. Go to Step 3, click the counter Edge you added the Bump-In to, and choose Segment This Edge.
4. Click on the center section of the Edge and select Other Splash to add the full height Splash.
5. Click on each adjacent portion of the Edge and add the appropriate Splash height.