Add Counter Material Without A Drawing To A Quote With Drawings

Do you want to add a counter without a drawing to a  Quote that already has drawings?

Counters without a drawing can be added to a  Quote that has a drawing at any time. Drawn counters can be added to Quotes without drawings too. It is not possible to automatically convert one to the other.

Counters without a drawing can be added or edited at any point during  Steps 1-4.

ADD COUNTERS WITHOUT A DRAWING

1. Create or open a Quote with a countertop drawing.
2. Go to Step 1 > click the Add Other Counter button.
3. Name the Counter and select to enter the size either the square footage or the counter measurements.
4. Add a Splash, enter the height and the size either by inches or linear feet. If not needed, leave blank or delete.
5. Enter an Edge length by either inches or linear feet. If not needed, leave blank or delete.
6. Add Curves & Bumpouts, additional Splash & Edges, or Sinks & Cutouts using the buttons across the bottom.

EDIT COUNTERS WITHOUT A DRAWING

1. In Step 1, Material without a drawing is listed under the Add Other Counter button on the right side.
2. Click on the counter Name to edit.